Qidi Xplus Firmware Install ((exclusive)) [ 720p 2024 ]

Copy the extracted firmware files directly to the root directory of the USB drive. Do not place them inside any folders. You will typically see files named with extensions like .cbd , .bin , or UI folders. Execute the Flash: Turn off the 3D printer using the main power switch.

Newer versions (V1.4.0+) support online updates, but offline files are available on the QIDI X-Plus 4 GitHub .

If a new version is available, follow the on-screen prompts to download and install. Post-Installation Steps

The QIDI X-Plus can be picky about USB drives. For the best results: qidi xplus firmware install

the printer while it is updating. The screen will tell you when it is safe to do so. 4. Post-Install Steps Once the update is complete, the printer will restart.

Ensure only the current firmware files are on the USB stick. Final Steps: Calibration

Before starting any firmware update, complete these preparation steps: Copy the extracted firmware files directly to the

Re-calibrate your printer. Perform an Auto-Leveling procedure and re-calibrate the Z-offset to ensure your first layer is perfect. Method 2: Upgrading to Klipper Firmware (Advanced)

Use a reliable USB flash drive (ideally 8GB to 16GB). Format it to FAT32 with a 4096-byte allocation unit size . Larger drives or alternative formats (NTFS, exFAT) often fail to read during boot.

For the original X-Plus (often distinguished by the orange accents and the X-Maker style chassis), firmware updates are done via SD card. Execute the Flash: Turn off the 3D printer

Do not immediately start a 20-hour print. After your firmware install and calibration, run a simple "XYZ Calibration Cube" from the SD card.

Updating the firmware on your Qidi X-Plus is essential for fixing bugs, improving print quality, and unlocking new features. Because Qidi has released multiple versions of the X-Plus (most notably the original X-Plus and the newer X-Plus 3), the installation process differs slightly between models.