Inside the extracted folder, you will find a configuration file named MP.ini . Open it with Notepad and configure it to match the PS2251-07 chip specs. Copy and adapt the following baseline configuration:
With the configuration saved, you are ready to flash the controller.
When using the Phison PS2251-07/PS2307 MPT tool, keep in mind:
Open the main flashing tool (e.g., MPALL_F1_7F.exe ) as an administrator. phison ps225107ps2307 mptool install
Ensure that MPParamEdit.exe , MPAll_F1_7F.exe , and your downloaded .bin firmware files are all located within the same main directory folder. Step 4: Configuring MPTool for PS2251-07
Right-click on and select Run as Administrator .
How to Install and Use Phison PS2251-07 (PS2307) MPTool for USB Repair The Phison PS2251-07 Inside the extracted folder, you will find a
Under the [PenDriveID] section, ensure the VID and PID match your device (common Phison defaults are 0000 and 0000 or 13FE and 5200 ). 3. Run as Administrator
: The tool is clearing the bad blocks and uploading the burner file. Do not touch the computer or bump the USB port.
Ensure you have toggled the "Low Level Format" option within the MPTool settings. When using the Phison PS2251-07/PS2307 MPT tool, keep
Once the tool turns green, close the MPTool program and physically unplug your USB drive. Wait 10 seconds, then insert the drive back into the computer.
Before proceeding, please be aware of the following critical points: