The distance between the highest peak and lowest valley within a sampling length. Root Mean Square Roughness
The diamond stylus is highly fragile. Always raise the Z-axis safely away from the workpiece before removing a part. When not in use, slide the protective plastic stylus cover back on. Troubleshooting Common Issues Probable Cause Corrective Action Noisy or inconsistent data graphs External floor vibrations or air currents.
20°C ± 1°C is ideal for laboratory-grade calibration. Humidity: 20% to 80% RH (non-condensing).
Wipe the reference patch gently using a lint-free cloth moistened with high-purity isopropyl alcohol. mitutoyo surftest sv400 user manual full
measures surface features relative to a precision drive unit reference, allowing for the accurate evaluation of waviness and ultra-fine stepped features Cloudinary Wide Parameter Support:
The Mitutoyo Surftest SV-400 is a powerful tool for surface roughness measurement, offering high precision, ease of use, and robust construction. By understanding its features, operating instructions, and maintenance requirements through the user manual, users can maximize the device's potential and ensure accurate measurements. Whether you're a seasoned professional or new to surface roughness testing, this guide and the full user manual are invaluable resources for achieving optimal results with the Surftest SV-400.
The SV-400 is typically operated via a dedicated remote control box or through Mitutoyo’s proprietary software interface. The Remote Control Joystick The distance between the highest peak and lowest
Secure the drive unit to the vertical column. Ensure the locking levers are tightly engaged.
(2 µm / 10 µm nominal values) to calibrate detector sensitivity. Software Compatibility : Often interfaces with SURFPAK-SV FORMTRACEPAK for advanced contour and roughness analysis. 한국 PME Maintenance & Parts Stylus & Detectors
Remove any red shipping brackets or protective foam from the drive unit and detector before powering on the machine. Step-by-Step Operational Instructions 1. Hardware Assembly and Connection When not in use, slide the protective plastic
Moves the column up or down to bring the stylus close to the workpiece.
The Mitutoyo Surftest SV-400 is covered by a limited warranty. For more information, please contact Mitutoyo or refer to the warranty documentation provided with the instrument.
Clean the diamond tip with a soft brush dipped in isopropyl alcohol. Never wipe the stylus with hard materials.
Mount the reference standard on the stage. Align it perfectly with the path of the stylus.