Meets PLe, Category 4 (EN ISO 13849-1) and SIL3 (IEC 61508) standards, ensuring maximum safety integrity.
IP65/IP67/IP69K 18;write_to_target_document7;default0;998;18;write_to_target_document1a;_fpLuaaPXLJOMnesPsbvS-A8_20;2a; 0;79;0;a3; Installation & Wiring 0;16;
To prevent premature wear, false trips, and tampering, follow these mechanical installation rules. Mounting Restrictions keyence gs-11pc manual
The GS-11PC features a slide switch on the sensor body (often accessible by removing a cover or on the face of the unit, depending on the revision). The manual defines these modes, but here is the cheat sheet:
The KEYENCE GS-11PC manual is a comprehensive document designed to guide users through the device's operation, maintenance, and troubleshooting. The manual covers a wide range of topics, including: Meets PLe, Category 4 (EN ISO 13849-1) and
The Keyence GS-11PC belongs to the GS Series of safety interlock switches. It is a non-contact, magnetic/RFID-coded safety switch designed to monitor the status of guards, doors, and gates. Key Features
: Safety is measured in milliseconds; the manual defines a risk time of 150 ms plus a small increment for each additional unit in the chain. 3. Installation and Care The manual defines these modes, but here is
10 mm (Sao - OFF to ON) to 18 mm (Sar - ON to OFF). Response Time: 20 ms for detection (Detect to Not detect).
The defines the wiring for the PNP M12 connector: Operating Voltage: 24 V DC ± 20% (Class 2). Outputs: Transistor outputs × 2 (OSSD outputs).
The switch is in an interlock state or waiting for a manual reset command.
