A Windows PC (Windows 7 or 10 is recommended for driver compatibility).
If you own a USB flash drive, SD card, or USB-based SSD that has become unresponsive, is showing the wrong capacity, or cannot be formatted, it likely uses a . The FirstChip FC1178 and FC1179 are popular, cost-effective controllers found in many modern USB drives, especially high-capacity drives manufactured in China.
Change the Volume Label, Vendor ID (VID), and Product ID (PID). When Should You Use This Tool? firstchip fc1178 fc1179 mptools v1052 free
: Fixes issues like "No Media," "Insert Disk," or write-protection errors. Low-Level Formatting
If the password 320 doesn't work, ensure you are using the correct version of the tool or look at the comments on the USBDev.ru download page for current default passwords. A Windows PC (Windows 7 or 10 is
If v1052 fails:
: When prompted for a password to access settings, users generally leave the field and click "OK". Scan Levels Change the Volume Label, Vendor ID (VID), and
FirstChip MPTools is a powerful tool intended for factory use. There is no way to recover files after a low-level factory flash. Furthermore, using the wrong firmware version can permanently brick your USB drive. Use this software at your own risk as a final resort for non-functional hardware.
Try the "Test Mode" method. This involves carefully shorting two pins on the flash chip while plugging it in to force the controller into a programmable state.
Use v1052 to rescue data or factory reset a drive. Then run Windows' built-in format (FAT32 or exFAT) – do not rely on MPTools for daily use.
The free utility is the definitive software solution for flashing, repairing, and restoring corrupted or fake USB flash drives built on FirstChip controllers. USB drives built on controllers like the FC1178BC, FC1179, FC1179S, and FC1179AB are notoriously common in ultra-budget, unbranded generic pen drives, promotional items, and counterfeit storage products sold online. When these drives become write-protected, show 0 bytes of capacity, freeze during transfers, or fail to be recognized by Windows, a generic format tool will not work. You must use a low-level factory mass production utility (MPTool) to reprogram the controller directly. What is FirstChip MpTools V1.0.5.2?