Deckma Omd11 Manual ⏰ 🔥
Flush the system with clean, oil-free water for 2 minutes before starting the oily water separator.
. It is specifically engineered with enhanced solids suppression, allowing it to distinguish oil from other particles like iron oxide more effectively than earlier models. 0 – 50 ppm. Alarm Points: Two independent circuits, factory-set at Operating Voltage: 230V 50Hz standard (others available on request). Protection: IP 65 rated for maritime environments. Installation Highlights
The Deckma OMD11 is a high-performance oil-water separator designed to efficiently separate oil and water mixtures in various industrial and commercial applications. Its robust design and advanced technology enable it to handle a wide range of flow rates and oil concentrations, making it a popular choice for industries such as: deckma omd11 manual
24V AC/DC, 115V AC, or 230V AC (model dependent).
Mount the instrument on a vertical bulkhead near the Oily Water Separator (OWS). Flush the system with clean, oil-free water for
• Verify sample pump pressure and clear pipe blockages.• Perform the manual cleaning procedure.• Inspect the light source; replace the cell if defective.
This is the most referenced part of the manual. The OMD-11 requires a 3-point calibration: 0 – 50 ppm
Care must be taken with hot water to avoid damage. 2.2 Installation Guidelines
The OMD-11 features a 2-digit, 14-segment LED display that shows the current oil content in ppm.
