Caraflo V200 Shower - Instructions

Flush out the water lines prior to mounting to prevent debris from logging into the new cartridge. Step-by-Step Mounting V200 Caravan Shower Mixer Valve 45mm Centres Caraflo

| Control | Function | |---------|----------| | (temperature) | Rotate to set desired temperature (max 38°C safety stop). Push button to override to 40–48°C. | | Right / front handle (flow) | Rotate to increase/decrease water flow. Pull to turn on, push to turn off. | | Diverter knob (if present) | Switch between overhead shower, hand shower, or both. |

Rotate the temperature handle back and forth several times to release trapped water inside the mixing chamber. Leave it set midway. caraflo v200 shower instructions

: Insert the provided rubber seals into the union nuts before tightening them onto the brass tails.

A number of specialist retailers can supply genuine Caraflo V200 valves. It is important to buy a genuine product, as cheaper copies may not have the same safety approvals or durability. The valve is used by most static caravan manufacturers in the UK and Europe after 2014. Flush out the water lines prior to mounting

: Frozen residual water within a thermostatic cartridge will expand. This cracks the internal nylon casing or breaks the Vernet copper capsule. You must drain the system when closing your caravan for winter.

Caraflo V200 is a thermostatic shower mixer valve commonly used in static caravans and holiday homes. Below are instructions for its installation, use, and winter maintenance. Installation Instructions | | Right / front handle (flow) |

The V200 is designed to mount directly through a caravan shower wallboard panel. Follow these steps for a secure, leak-free installation:

Check that your caravan boiler or water heater is fully operational. If the hot water supply is fine, you may need to remove the thermostatic cartridge from the valve body and soak it in a commercial descaling solution for 30 minutes. Issue 3: Drips From the Valve Body After Turn-Off