Avery Berkel L126 Calibration ((install)) Jun 2026

: Verify that the scale's leveling feet are properly adjusted and that the platform is not contacting any surrounding walls or cables.

Check the spirit level bubble on the scale base and adjust the feet until the bubble rests perfectly in the center circle.

If you notice inconsistent readings when the same item is weighed multiple times. avery berkel l126 calibration

For many Avery Berkel L-series models, the process involves accessing a service menu: Access Calibration Mode : Locate the SW1 button

After restarting, place a known weight on the scale to verify the reading is now accurate. : Verify that the scale's leveling feet are

Locate the hardware calibration switch () on the bottom housing of the indicator. Press the SW1 button once using a small screwdriver or pen.

Once inside the setup menu, use the navigation keys to locate the specific calibration functions. For many Avery Berkel L-series models, the process

: Press the Zero button twice until the display reads "C A L" . Confirm by pressing the Test button.

Follow these precise sequential steps to program your indicator: Step 1: Access the Diagnostic Menu

Once you have successfully entered service mode:

Once the zero calibration is complete, the display will prompt for the span weight, often displaying CAL SP followed by a weight value (e.g., 15.000 kg ).